Crown Xti 2002 Pro Audio Power Amplifier

Crown
Pro Audio Power Amplifier

$ 1,398.00 $ 699.00





-
+
Add to Wishlist

There's no debate - when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

Features

  • Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect control software
  • Increased number of presets to a total of 50; 49 of which are user definable

Technical Specs

  • Minimum Guaranteed Power, (1 kHz Per channel, both channels driven)
  • Stereo, 2 ohms (per ch.): 1000W
  • Stereo, 4 ohms (per ch.): 800W
  • Stereo, 8 ohms (per ch.): 475W
  • Bridge-Mono, 8 ohms: 1600W
  • Bridge-Mono, 4 ohms: 2000W
  • Integrated Processing
  • Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.
  • Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ±15 dB bandpass gain and polarity control.
  • Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.
  • Delay: for signal alignment of driver; 50 mS of total delay.
  • SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.
  • Peak x Plus Limiter: user defeatable limiter that allows users to control Threshold, Attack, and Release times.
  • Presets: 30 total presets, 29 of which are user-definable.
  • Performance
  • Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
  • Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, -1 dB
  • Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted)
  • Total Harmonic Distortion (THD):
  • Damping Factor 20 Hz to 1 kHz: >500
  • Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db
  • Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced
  • Maximum Input Signal: +22 dBu typical
  • AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
  • AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per channel): 8.3A; no more than 38W at idle
  • Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)
  • Controls
  • Level: two front-panel rotary level controls, one for each channel
  • Power Switch: On/Off switch applies AC power to the amplifier
  • Sel/Prev/Next Buttons: three buttons near the LCD screen that are used to access menu items and front panel lockout
  • LCD Screen: backlit liquid crystal display that shows preset and processing status
  • Indicators
  • Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
  • -10 Indicator: Green LED flashes when output signal exceeds
  • --10 dB below clip.
  • -20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip.
  • Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
  • Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
  • Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
  • Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
  • Input/Output Connectors
  • Input Connectors: XLR, one per channel
  • Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
  • Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
  • HiQnet USB Connector: Type B, connects to HiQnet network.
  • Construction
  • Chassis: Steel
  • Front Panel: Cast-aluminum
  • Cooling: Proportional speed fan with front-to-rear airflow.
  • Dimensions: 19" (W) x 3.5" (H) x 12.25" (D)
  • Net Weight: 18.5 lb. (8.4kg)

Have a question about this product? Ask your question here.



Yandas Music is an official Crown Audio dealer.

Available Options

  • Crown Xti 2002 Pro Audio Power Amplifier Crown Xti 2002 Pro Audio Power Amplifier
    Model Number: XTI2002
    Barcode: 871015005379
    Kearney, NE Stock: 0
    Grand Island, NE Stock: 0
    Your Price: $ 699.00

Related Categories


30 Day Satisfaction Guarantee

At YandasMusic.com your complete satisfaction is our number one goal! That is why we are pleased to include a 30 day return guarantee with every order.If you are unhappy with a product for any reason, visit our contact page here, and let us know! We're here to help in any way that we can. Our return policy was created to help keep our prices low, and to ensure that a customer is never stuck with a item they do not want.


Shipping Information

Yandas Music is pleased to offer free UPS ground shipping on nearly every order over $39. To find out if your order qualifies for free shipping, simply add the items to your cart!


Customer Questions

No customer questions yet. Ask your question now, and get the party started!

Ask Your Question

Related "Products"