Product Description

Shape your sound with the JHS Clover Guitar Preamp Pedal, a versatile FET preamp and boost inspired by the classic FA-1 circuit. Use its Volume control to match your signal or drive an amp and pedals, then fine-tune your tone with Bass, Mid, and Treble controls. Three EQ modes offer full tone shaping, a fixed-mid voicing, or a clean FET boost with the EQ bypassed.

Connect through the standard 1/4-inch input and output, or use the XLR output to send your signal to a mixer or audio interface. The Clover works with electric guitar, acoustic guitar, and bass, while a Low Cut switch helps reduce excess bass and a ground lift can help address hum from the XLR connection.

  • FET preamplifier and boost for guitar, acoustic, and bass
  • Bass, Mid, and Treble EQ with three selectable modes
  • 1/4-inch and XLR outputs for flexible connections
  • Low Cut switch and XLR ground lift
  • Push an amp or pedals with added clarity and tone control
  • Assembled in Kansas City, USA

SPECIFICATIONS
XLR output is identical to the 1/4” output
Up to +24dB of gain (X16.4) (EQ Flat)
Treble +/- 15dB shelving filter at 10kHz
Middle +/- 15dB peaking filter at 1.3kHz
Bass +/- 15dB shelving filter at 270Hz (3dB freq)
Lo cut engaged -3dB point at 212Hz
Input impedance >1M ohm
Output impedance = 520ohms
Current draw at idle = 45.5mA

Similar Products

Customers also viewed